[DOWNLOAD SOURCES + DEMO PROJECT]
[DOWNLOAD LIBRARY ONLY]
Welcome Back!
Today, I would like to talk about screen management in XNA. For a game I recently created, I was looking for a flexible yet stable screen management model in XNA. To keep a long story short, I ended up with an own solution which I would like to share with you.
Overview
I think it’s crucial that a game developer is absolutely free to decide which screen transitions should exist in their game and when they should be performed. However, screen management can be a daunting task and it’s tedious to reprogram it for every game. So my goal was to encapsulate the boilerplate part in a game library, making it reusable (for everyone), without limiting the mentioned flexibility. It’s up to you to decide how well I achieved this goal, I really appreciate every comment.
I present my solution in terms of a 2D example game to illustrate its flexibility, scalability and stability. I start with a description of the problem space to settle a common starting point. Then, I describe how you solve the task with the DynamicScreenManagement library. The third section deals with the internals of the library and how everything works. I end this article with some related questions on XNA I stumbled upon during the development of this lib. I’m really interested in what the community thinks of these points, so feel free to share your thoughts.
Academic Preface
Since I work as a lecturer, I’m always eager to find solutions which conform to OODP. XNA sometimes makes this a hard challenge. The reason I’m telling you this is that there surely are more direct solutions for screen management. However, I wanted to be sure to create a separation of concerns in terms of what a screen needs to know and what the game class needs to know. Let’s go to the problem space to make this more vivid.
Problem Space
Think of a 2D game where you have to explore a game world via a map. The map contains all locations the player can travel to in the game. When a player visits a map location, a new level starts (just like in Super Mario World). We can illustrate this as a screen graph. Figure 1 shows an example of such a screen graph.
 |
| Figure 1: Example Screen Graph |
When a level or a mini game is finished, we want to return to the Map screen. Mini games return to the Map screen after a distinct amount of time (blue transition, tried to paint a stopwatch), while levels return after a distinct event happened (tried to paint a red bolt), for example after the player beats a final boss or dies.
Summing up the possible triggers of screen transitions, we have three kinds:
- Input-Driven: The player interacts with the game and triggers a screen transition by purpose. For example, the player selects the A-Button on his controller to perform the transition from Start screen to Map screen.
- Time-Driven: After a distinct amount of time has passed, the game triggers a screen transition by itself (end of a mini game).
- State-Driven: The game reaches a former defined state (scripted event), which leads to a screen transition. For example, the player reaches a certain point in a level, or dies.
Despite the great demand on flexibility and thus arbitrary wiring of screens, the necessary interface of my library is very small and easy to use (as I hope :)).
Solution Space
Let’s dive right into a demo implementation using the library (the demo game complies with the structure of Figure 1), just to see how it works.
protected override void Initialize()
{
/*** 1. Instantiate all your screens here ***/
Screen startScreen = new StartScreen(this, "startScreen");
Screen mapScreen = new MapScreen(this, "mapScreen");
Screen miniGame1Screen = new MiniGameScreen(this, "miniGame1Screen");
Screen level1Screen = new LevelScreen(this, "level1Screen");
Screen gameOverScreen = new GameOverScreen(this, "gameOverScreen");
Screen endScreen = new EndScreen(this, "endScreen");
/*** 2. Instantiate the screen manager with your game's start screen ***/
ScreenManager screenManager = new ScreenManager(startScreen);
/*** 3. Tell the manager which transitions should exist ***/
screenManager.AddScreenTransitionBetween(startScreen, mapScreen);
screenManager.AddScreenTransitionBetween(mapScreen, miniGame1Screen);
screenManager.AddScreenTransitionBetween(miniGame1Screen, mapScreen);
screenManager.AddScreenTransitionBetween(mapScreen, level1Screen);
screenManager.AddScreenTransitionBetween(mapScreen, endScreen);
screenManager.AddScreenTransitionBetween(level1Screen, gameOverScreen);
screenManager.AddScreenTransitionBetween(level1Screen, mapScreen);
screenManager.AddScreenTransitionBetween(gameOverScreen, startScreen);
screenManager.AddScreenTransitionBetween(gameOverScreen, endScreen);
/*** 4. Tell XNA which screens exist (you don't need to use the
XNA Components, but I think it's reasonable in this context) ***/
this.Components.Add(startScreen);
this.Components.Add(mapScreen);
this.Components.Add(miniGame1Screen);
this.Components.Add(level1Screen);
this.Components.Add(gameOverScreen);
this.Components.Add(endScreen);
base.Initialize();
}
We see the Initialize method of the Game1 class of the demo game, realizing four steps.
- The first step is to instantiate our game screens. Note that all screen classes need to inherit from the Screen class of the DynamicScreenManagement library. We pass the game instance (this) and a screen-ID to the constructors, which I will come back to later.
- Second, we instantiate the ScreenManager class of the library. The constructor requires a reference to the start screen of the game.
- The third step is to add transitions between our screens, using the screen manager instance. Note that here we just tell which transitions exist, not on what they depend or how they are triggered.
- Last but not least, my Screen class is a DrawableGameComponent, so we can just add our screens to the XNA component list to let the framework call their client code.
public override void Initialize()
{
this.WireScreenTransition(InputHandler.Buttons.A, true, "mapScreen");
base.Initialize();
}
This is the Initialize method of the Start screen. We use the inherited method WireScreenTransition to determine which button (first parameter) and which screen state (second parameter) lead to which screen (last parameter). Here, we see what we need the screen-ID for. The Start screen does not hold a direct reference to the Map screen, so that we need to make use of an ID to wire the screens up properly.
In the example, we determine that the transition from Start screen to Map screen is defined by the A-Button and the screen state true.
public override void Update(GameTime gameTime)
{
InputHandler state = InputHandler.Instance;
if (state.IsKeyDown(InputHandler.Buttons.A, true))
{
this.PerformScreenTransition(InputHandler.Buttons.A, true, false);
}
base.Update(gameTime);
}
In the logic part of our Start screen, we determine that, when A is pressed, the game should perform the transition which is defined by the combination of the A-Button and the screen state true. This already points to the fact that—for every screen—the combination of a pressed button and a distinct screen state must be a unique pair (the transition context), even if the button and/or the state does not trigger the transition at all.
To give two more examples, let's look at the implementation of the Map screen and then the Level screen:
public override void Initialize()
{
/*** The player should start at the start location ***/
this.currentMapLocation = new MapLocation("start", new Vector2(400, 10));
/*** The transition to level 1 should be triggered when
A is pressed and the player is at the corresponding
map location at runtime ***/
MapLocation level1MapLocation = new MapLocation("level1", new Vector2(400, 50));
this.WireScreenTransition(InputHandler.Buttons.A,
level1MapLocation,
"level1Screen");
/*** Same for the mini game 1 and end screen ***/
MapLocation miniGame1MapLocation = new MapLocation("miniGame1", new Vector2(400, 90));
this.WireScreenTransition(InputHandler.Buttons.A,
miniGame1MapLocation,
"miniGame1Screen");
MapLocation endMapLocation = new MapLocation("end", new Vector2(400, 130));
this.WireScreenTransition(InputHandler.Buttons.A,
endMapLocation,
"endScreen");
...
}
In the Map screen, the transition to another screen depends on the current map location of the player during runtime. Hence, we pass the locations which correspond to the given screens as second parameter when wiring the screens up. In fact, you can read the following line of code
...
this.WireScreenTransition(InputHandler.Buttons.A,
endMapLocation,
"endScreen");
just like: When "A" is pressed and the player is at the endMapLocation, the screen transition should lead to "endScreen". We perform the transition in the Update method of the class.
public override void Update(GameTime gameTime)
{
InputHandler state = InputHandler.Instance;
/*** Thanks to the specific screen wiring, the transition
performance is simple: When A is pressed, we pass the current
map location and the correct transition will be triggered.
***/
if (state.IsKeyDown(InputHandler.Buttons.A, true))
{
this.PerformScreenTransition(InputHandler.Buttons.A,
this.currentMapLocation,
true);
}
...
Here, we can use the runtime value of the currentMapLocation to trigger the correct transition when the A-Button is pressed. Easy, isn’t it?
Now, how does it work when the player input is not responsible for the performance of a transition? Very similar, as the Level screen shows:
public override void Initialize()
{
/*** In this screen, we see how to wire screen transitions
which are not triggered by user input. Apparently, the
first two parameters do not matter. Their combination just
needs to be unique for every transition from this screen.
We just need to tell where the screen transition needs to point
***/
this.WireScreenTransition(InputHandler.Buttons.Empty,
false,
"gameOverScreen");
this.WireScreenTransition(InputHandler.Buttons.Empty,
true,
"mapScreen");
base.Initialize();
}
The wiring process of the Level screen looks a little bit different, using the same method. There is no user input that triggers the transitions this time. Nonetheless, we need to state a unique button--state pair (transition context) to define every transition. In the game logic, we use this context to perform the transition of choice.public override void Update(GameTime gameTime)
{
if (firstUpdate)
{
this.randomNumber = random.NextDouble();
this.firstUpdate = false;
}
this.playerEnergy -= gameTime.ElapsedGameTime.TotalSeconds;
if (randomNumber < 0.5f)
{
/*** When the player is dead, we perform the transition
to the gameOverScreen ***/
if (this.playerEnergy <= 0)
this.PerformScreenTransition(InputHandler.Buttons.Empty,
false,
false);
}
else
{
/*** in this case, we simulate a successful play and
return to the map screen ***/
if (this.playerEnergy <= 1)
this.PerformScreenTransition(InputHandler.Buttons.Empty,
true,
false);
}
base.Update(gameTime);
}
For the demo, I use a random number to determine how the level ends. Either, the player dies and we perform the transition to the Game Over screen, or the player beats the level and we return to the Map screen.That's how it's applied. Now, let's have a look at the internals to see why it works this way.
The Internals
First, I would like to note that you can find the library (with all commented sources and the demo game) here [PROJECT + DEMO SOURCES DOWNLOAD].
The class structure of the library is illustrated in Figure 2. We see a very slim ScreenManager class. It knows the Start screen and offers the method to add transitions between screens. I also added a Reset method that iterates over the screen list and calls every ResetScreen method.
 |
| Figure 2: Class Diagram (click to enlarge) |
So, what's that ID stuff about? The problem is that a screen, when it wires up its transitions using the corresponding transition context objects (the method "WireScreenTransition", compare the Initialize methods of the screens above), it does not hold an instance of the target screen. Using an ID solves this problem, since we can use the transition context as a key to the corresponding screen ID, while we use the same screen ID as a key in another Dictonary to point to the corresponding screen. In the same time, this bears the issue that a game developer must be sure to use the same ID for a screen at two different locations. I illustrated this functionality in Figure 3.
 |
| Figure 3: How the wiring works (click to enlarge) |
Well, I'm very interested what the community thinks of my approach. There are several aspects I consider critical by myself, but in practice, it turned out that the library works fine, especially when adding and wiring up new screens to a given game. What's more, you can playtest every screen very simple by adding the screen of choice as the start screen to the screen manager.
As an additional layer of abstraction, I think of an interface like realized in the SharpLudus project.
Furthermore, I would like to discuss some questions that might have come up during reading the text. At least, they came up while programming the library here ;)
Q: Why are the methods WireScreenTransition and PerformScreenTransition not overloaded, so that I would not have to state a button--state pair if it is not useful for my transition?
A: It would be possible to add overloaded versions, but this would bear several issues. The button--state pair defines a transition, even if it does not relate to it directly. Offering a overloaded version where the caller does not need to provide the context information results in a method that could only be called once. A design I don't like.
Q: What is that InputHandler class doing here?
A: The InputHandler is a hangover of the game where I wrote the screen management for. You can rewrite the library very easy for "XNA-native" controller respectively keyboard input. I jus tlike the small InputHandler since I can play my game with both input devices and since it can distinguish a key down event as a single event if you use the overloaded method ;)
Q: Isn't it error-prone to use an ID at two different locations to wire the screens up?
A: Yes, it is, but I don't have a better solution so far.
Q: Why did you built this stupid SpriteBatchHolder solution which is not thread-safe anyway?
A: My motivation is to draw on one and the same SpriteBatch object, since I suppose (and this might be rubbish), that there might be a performance issue using one SpriteBatch for every screen. Who knows more? It's not thread-safe, true, and it's not really a singleton, but since it is realized as a private inner class, there should not be a problem of multiple instances. One could add a locking mechanism if desired.
Q: So why didn't you just use the XNA Services to make the SpriteBatch available to everyone like described here?
A: I don't like the idea of global available references. My solution makes the SpriteBatch available to who should know about it, the screens, no one more, no one less.
Keine Kommentare:
Kommentar veröffentlichen